Pyrophyllite grinding mill
China No.1 Technology
- Our New type: Combined grinding wheel bracket – Demonstration of assembly
- Our New – type: Rhombic Spindle
- Easy to disassemble.
- Low cost of accessories.
- Spindle nut No loosening, No thread slipping, No falling off.
- Low cost, High reliability
Pyrophyllite grinding mill description:
First off, Pyrophyllite grinding mill is a purpose-built industrial grinding machine made just for processing pyrophyllite ore. Its main job is to shrink pyrophyllite particles down to fit the exact fineness needs of different downstream uses. You’ll typically find it in three main setups: Raymond mill, vertical mill, or ultrafine mill. What’s great about these models is that you can tweak the fineness easily, they run super steadily, and they’re really efficient when working with soft pyrophyllite material.
| Mesh (D97) | 319 Type | |
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 325 | 10000~12000 | 22-26 |
| 400 | 9000~9500 | 26-30 |
| 600 | 6000~7500 | 31-36 |
| 800 | 5000~6500 | 46-53 |
| 1250 | / | / |
| 377-407 kW | ||
| Mesh (D97) | 219 Type 28 rollers or 26 Roller Price are the same | 309 Type 32 Roller or 28 Roller price are the same | 1160 Type 32rollers or 34rollers price are the same | |||
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 400 | 5000~6000 | 29-38 | 9000~9500 | 26-30 | ||
| 800 | 4000~4500 | 45-53 | 5500~6500 | 43-48 | 6500~7500 | 41-48 |
| 1250 | 2300~3000 | 65-70 | 3500~4000 | 66-72 | 4500~5200 | 59-75 |
| 1500 | 1600~2300 | 83-90 | 2500~3000 | 85-92 | 3200~4000 | 78-90 |
| 2000 | 1100~1600 | 125-133 | 1500~2000 | 125-133 | 2300~2800 | 110-134 |
| 2500 | 900~1300 | 138-145 | 1100~1500 | 138-146 | 1500~1800 | 160-201 |
| 3000 | / | / | 1000~1200 | 185-192 | / | / |
| Total Power | 237 kW | 340-387 kW | 372-457 kW | |||
- Drawing line: As shown in below picture：
- Dig a hole: The SHM-309 foundation drawing showed size : length:3.65M,wide:3M，highly:0.5M.When Dig the hole need to have reservation some size.
Suggest size: length:4M，wide:3.5M.
- Put reinforced:Arrangement of two layers of rebar in the pit.
The size of reinforced:DiameterΦ16，spacing:20cm，Tie the rebar tightly with steel wire.
- Set mould: Enclose the square pit with template and height is the same as the ground.
- Welded: Accurately arrange the position of the steel mould and motor seat.Put 6 rebar (Φ 24) inside of each steel die (2 steel mould); Four corners of the motor base stand up and 1 rebar(Φ 18). Each rebar is 50 cm higher than the horizontal plane.
- First pouring concrete: The height is the same as the floor.
- Placing main machine steel die: The next day, Placing the main machine steel mould according to the size of the basic drawing.
- Weld: After the steel mould is put in place and make sure all sizes are correct. Weld the steel mould with 6 rebars (Φ24) together.
- The second pouring concrete. When pouring, the first steel mould is pouring half, and then poured another half of the steel mould, then back to pouring the first steel mould. It ensures that the size comparison does not deviate.Attention
- A single steel mould must be horizontal, at the same time, two steel mould dies must be horizontal.
- The pitch-row of the foundation bolts of two steel mould must be accurate. SHM-309 roller mill is 2045mm.
- Two steel mould cannot be misplaced.（It can be corrected by diagonal lines between steel dies, the length of diagonal must be equal.）
- The center line between steel mould and motor seat must be accurate. SHM-309 roller mill is 1900mm.
- After the steel mould is put in place and make sure all sizes are correct, the two steel mould must be welded and fixed with three channels steel before pouring concrete. Make sure the steel mould is not displacement and dimension not error during pouring. (This step must be done.)
What is Pyrophyllite grinding mill?
Simply put, this is a specialized powder-making machine designed specifically for pyrophyllite, a common soft aluminosilicate mineral. It takes raw pyrophyllite ore, crushes and grinds it into finished powder with a huge range of fineness levels—from basic coarse powder all the way up to ultra-fine particles. This lets it fit production needs across tons of different industrial sectors.
What is the Pyrophyllite grinding mill process?
The standard workflow goes like this: First, we take those big raw pyrophyllite blocks and pre-crush them down to a size that fits the mill’s feed requirements. Next, we feed that pre-crushed material into the Pyrophyllite grinding mill to get it ground up. After grinding, a separator sorts the powder: any powder that meets the fineness standard gets collected and packaged, while the too-coarse material loops back into the mill to be ground again.
What are the uses of Pyrophyllite grinding mill?
This mill turns pyrophyllite into standardized powder that works for a ton of different industries. The finished powder pops up everywhere: in ceramic production, refractory materials, papermaking, as a filler for rubber and paint, even in cosmetics, pesticide additives, pharmaceutical excipients, and as a base material for artificial gemstones. It can adapt to all kinds of different fineness requirements for these uses.
What is the best Pyrophyllite grinding mill process?
There’s no one-size-fits-all best process here—it all depends on your target output and how fine your finished powder needs to be. If you’re making 80 to 325 mesh powder with small to medium production levels, the closed-circuit Raymond grinding process is the most budget-friendly and effective pick. For ultra-fine powders finer than 325 mesh or large-scale manufacturing, a vertical ultrafine grinding process will give you better efficiency and a higher quality finished product.
Pyrophyllite grinding mill process Application:
The grinding process from the Pyrophyllite grinding mill is used in full industrial pyrophyllite processing lines to make powders in all sorts of specifications. Coarse 80 to 200 mesh powder is great for refractory materials and ceramic blank production. 325 to 1250 mesh powder works perfectly as a filler for papermaking, paint, and rubber products. Anything finer than 1250 mesh is perfect for cosmetics and pharmaceutical industries.
Pyrophyllite grinding mill Processing Technology:
The two most common processing techs are dry grinding and wet grinding. Dry grinding is the most popular option overall—it has low production costs and makes packaging and transportation way easier down the line. Wet grinding is mostly used for making high-purity ultra-fine pyrophyllite powder; it can create better particle shapes and higher purity, but it does come with higher production costs.
Guide to Pyrophyllite grinding mill: Mills, Tips, and Uses
When you’re picking a Pyrophyllite grinding mill, you should base your choice on your output needs and fineness requirements. A Raymond mill works well for small to medium production of 80 to 325 mesh powder, a vertical mill is ideal for large-scale runs, and an ultrafine mill is the way to go for super fine powder. A few practical pro tips: swap out worn grinding parts on a regular basis, keep an eye on the raw material’s moisture level, and control the feeding speed to keep the mill running smoothly. At the end of the day, this machine processes pyrophyllite powder for all kinds of downstream industries.
What is the auxiliary equipment in a Pyrophyllite grinding mill plant?
You’ll find a few standard pieces of auxiliary equipment here: jaw crushers or impact crushers for pre-crushing those big raw pyrophyllite blocks, a vibrating feeder to keep feeding material evenly, a powder separator to sort the ground product, a pulse dust collector to keep dust contained and meet environmental standards, belt conveyors to move material between steps, and an automatic packaging machine for the finished powder.
How to optimize Pyrophyllite grinding mill grinding efficiency?
There are a few straightforward ways to boost efficiency. First, keep an eye on the raw material’s moisture—too much moisture will make the material stick together and cause clogs. Second, feed material steadily and at a rate that matches the mill’s maximum handling capacity. Third, check and replace worn grinding rollers and rings regularly to make sure the mill has enough grinding force. Finally, adjust the separator’s speed correctly to hit your target fineness and cut down on unnecessary energy use.
Roller Mills for Sale
About LKMixer
LKMixer is a professional manufacturer for grinding and mixing production line, grinder, mixer and granulator, shredder. These machines are widely used in food, pharmaceutical, cosmetic, health care products and chemical industries. The Food materials like Peanut, mushroom, seeds, potato, bean, tobacco, salt, cannabis, tea, Sugar, corn, Coffee, rice, pepper, grain as so on. Grinders have many types such as Pulse Dust Grinder which suitable for zero pollution environment, Turbine Mill which is suitable for coffee bean, 12-120mesh all can meet, Ultrafine Grinding Mill covers 80-200mesh, and also Winnowing Dust Grinder or other grinding machines like SF Hammer. Welcome to contact us for details. Contact us for more information. Proposal, catalog, quotation.
FAQ(Click and See More)
Why Choose Us?
We have 20 years manufacturing experiences; 15600 cubic meters factory area; 5000sets annual capacity; 55 professional engineers;
What’s your main maket?
South America: Brazil, Colombia, Peru, Bolivia, Uruguay, Paraguay ;Romania;
USA with UL Certification
Middle East: Saudi, Arabia, Oman, Turkey
Europe: Russia, Australia, Belarus, Ukraine, Poland
Can you support OEM?
– Yes, OEM or ODM. Machine can be customized according to customer detail requirement, including capacity and voltages, motor certifications.
– Drawing and raw materials also can be customized.
What after-sale services?
– 7*24 customer service online;
– 7*24 engineers online services;
– 12 months warranty services.
WHAT kind of MACHINE YOUR COMPANY HAVE?
CAN YOU GIVE ME GUIDE ON OTHER MACHINE ? TO FULL MY PRODUCTION LINE
YES ! Our f have factory build more than 20 years now, we can design and customize whole line, besides of the grinding machine, mixing machine, we can also fully support to provide the washing machine, cutting machine, drying machine, packing machine, filling machine. Though we are not producing these machine, but our brother companies co-work together for over 20 years, we have rich experience in providing you a full effective production line, fully automatically or semi-automatically.
HOW TO VISIT YOUR COMPANY?
Our Factory located in Jiangsu Province, very near to Shanghai, you can fly to Shanghai Pudong Airport, we pick you up and take you by car 2 hours ride, can reach our factory, welcome your visit.
WHAT’S YOUR BEFORE & AFTER SERVICE ?
1) Before your purchasing, we need to know your detail request, such as what kind of material you want to grind and mixing, what final product powder or granule you want to reach. Because different material and powder sizes request of different machine to do. We can provide professional advice and rich experience help to choose machine. Most of the products we have already did before for other customer, trail test or run mass production, so we knows which machine is best in performance of grinding and mixing. This is of very importance in helping you choose the right model. We also wish this can help our customer a lot. Even the material we didn’t do before, we will prepare the same material and to do the trail test and send video to you for your reference.
2) One Year guarantee of machine quality. If the machine have problem within one year, we will send you the spare parts to you for replacement, but this not including the damage caused by human causes. We also have 24 hours on line guide for customer, if you have operation difficulty, we will guide by video and on line communication with our engineer for your emergency debug.
3) For small machine, we sell with whole machine, it’s no need to install, and easy to operation, no problems for operation. While for large machine, its’s also not difficult to install with video guideline, but if you need, we can assign our technicians to go abroad, the round ticket, food and residents will be paid by customer.
HOW ABOUT YOUR PAYMENT TERM?
Our payment term is T/T. 50% payment in advance, rest of 50% payment finish before the goods shipped. When we finish the machine production we will do trail test and run the machine take videos for your green light. You pay the rest of 50% payment then.
