Wollastonite grinding mill
China No.1 Technology
- Our New type: Combined grinding wheel bracket – Demonstration of assembly
- Our New – type: Rhombic Spindle
- Easy to disassemble.
- Low cost of accessories.
- Spindle nut No loosening, No thread slipping, No falling off.
- Low cost, High reliability
Wollastonite grinding mill description:
Wollastonite grinding mill is a professional industrial grinding equipment designed specifically for processing wollastonite ore. It can crush and grind bulk wollastonite raw materials into powder products that meet different fineness requirements. It has the characteristics of stable operation, high grinding efficiency, low energy consumption and adjustable product fineness, and is suitable for large-scale industrial processing of wollastonite.
| Mesh (D97) | 319 Type | |
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 325 | 10000~12000 | 22-26 |
| 400 | 9000~9500 | 26-30 |
| 600 | 6000~7500 | 31-36 |
| 800 | 5000~6500 | 46-53 |
| 1250 | / | / |
| 377-407 kW | ||
| Mesh (D97) | 219 Type 28 rollers or 26 Roller Price are the same | 309 Type 32 Roller or 28 Roller price are the same | 1160 Type 32rollers or 34rollers price are the same | |||
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 400 | 5000~6000 | 29-38 | 9000~9500 | 26-30 | ||
| 800 | 4000~4500 | 45-53 | 5500~6500 | 43-48 | 6500~7500 | 41-48 |
| 1250 | 2300~3000 | 65-70 | 3500~4000 | 66-72 | 4500~5200 | 59-75 |
| 1500 | 1600~2300 | 83-90 | 2500~3000 | 85-92 | 3200~4000 | 78-90 |
| 2000 | 1100~1600 | 125-133 | 1500~2000 | 125-133 | 2300~2800 | 110-134 |
| 2500 | 900~1300 | 138-145 | 1100~1500 | 138-146 | 1500~1800 | 160-201 |
| 3000 | / | / | 1000~1200 | 185-192 | / | / |
| Total Power | 237 kW | 340-387 kW | 372-457 kW | |||
- Drawing line: As shown in below picture：
- Dig a hole: The SHM-309 foundation drawing showed size : length:3.65M,wide:3M，highly:0.5M.When Dig the hole need to have reservation some size.
Suggest size: length:4M，wide:3.5M.
- Put reinforced:Arrangement of two layers of rebar in the pit.
The size of reinforced:DiameterΦ16，spacing:20cm，Tie the rebar tightly with steel wire.
- Set mould: Enclose the square pit with template and height is the same as the ground.
- Welded: Accurately arrange the position of the steel mould and motor seat.Put 6 rebar (Φ 24) inside of each steel die (2 steel mould); Four corners of the motor base stand up and 1 rebar(Φ 18). Each rebar is 50 cm higher than the horizontal plane.
- First pouring concrete: The height is the same as the floor.
- Placing main machine steel die: The next day, Placing the main machine steel mould according to the size of the basic drawing.
- Weld: After the steel mould is put in place and make sure all sizes are correct. Weld the steel mould with 6 rebars (Φ24) together.
- The second pouring concrete. When pouring, the first steel mould is pouring half, and then poured another half of the steel mould, then back to pouring the first steel mould. It ensures that the size comparison does not deviate.Attention
- A single steel mould must be horizontal, at the same time, two steel mould dies must be horizontal.
- The pitch-row of the foundation bolts of two steel mould must be accurate. SHM-309 roller mill is 2045mm.
- Two steel mould cannot be misplaced.（It can be corrected by diagonal lines between steel dies, the length of diagonal must be equal.）
- The center line between steel mould and motor seat must be accurate. SHM-309 roller mill is 1900mm.
- After the steel mould is put in place and make sure all sizes are correct, the two steel mould must be welded and fixed with three channels steel before pouring concrete. Make sure the steel mould is not displacement and dimension not error during pouring. (This step must be done.)
What is wollastonite grinding mill?
It is a special industrial milling equipment dedicated to processing wollastonite. It grinds wollastonite ore into fine powder through extrusion, impact and grinding between grinding media and wollastonite materials. It can adjust the fineness of the finished product according to different application needs, and is a core processing equipment in the wollastonite deep processing industry.
What is the wollastonite grinding mill process?
First, the bulk wollastonite ore is crushed into small pieces by a crushing device, then lifted to the storage bin, and uniformly fed into the grinding chamber of the wollastonite grinding mill. After being ground by the grinding roller and grinding ring, the fine powder is brought to the separator by the air flow for classification. The qualified fine powder is collected with the air flow into the finished product silo, and the unqualified coarse material is returned to the grinding chamber for re-grinding.
What are the uses of wollastonite grinding mill?
Wollastonite grinding mill is used to process wollastonite ore into powder of different fineness for downstream industries. Processed wollastonite powder is widely used in ceramics, plastics, coatings, rubber, building materials, metallurgy and environmental protection industries. It can meet the particle size requirements of wollastonite for different application scenarios, and is the core equipment for deep processing of wollastonite resources.
What is the best wollastonite grinding mill process?
The best process is closed-circuit grinding with airflow classification. This process can strictly control the fineness of the finished product, avoid over-grinding, reduce energy consumption, and improve grinding efficiency. It can ensure that the particle size distribution of wollastonite powder meets the requirements of downstream applications, maintain stable product quality, and adapt to large-scale continuous production, which is the most widely used and efficient process at present.
Wollastonite grinding mill process Application:
This process is applied in wollastonite deep processing production lines to produce wollastonite powder for different industries. It is used to produce ceramic raw materials with stable fineness, functional filler for plastics and coatings, and metallurgical protective slag raw material. It can also provide high-fineness wollastonite powder for new building materials and environmental protection materials, matching the production needs of different scales of processing enterprises.
Wollastonite grinding mill Processing Technology:
The main processing technology is mechanical grinding combined with airflow classification. The crushed wollastonite small particles enter the grinding chamber, and are ground by the extrusion and impact of grinding rollers and grinding plates/rings. The powder is classified by a centrifugal separator, qualified products are collected, and unqualified materials return for re-grinding. Common technological routes include dry grinding processes, most of which adopt closed-circuit circulation to control product fineness.
Guide to wollastonite grinding mill: Mills, Tips, and Uses
Common mill types include Raymond mill, vertical roller mill and ultra-fine grinding mill. Tips: First, select the corresponding mill type according to the required fineness of the finished product; control the feeding speed and size evenly to avoid blockage; replace worn grinding parts regularly. The processed wollastonite powder can be used as filler in plastics, coatings, ceramics, rubber and building materials to improve product performance.
What is the auxiliary equipment in a wollastonite grinding mill plant?
Common auxiliary equipment include crushing equipment (jaw crusher, impact crusher) for pre-crushing raw ore, hoist for conveying materials, vibrating feeder for uniform feeding, powder classifier for product classification, pulse dust collector for dust removal, air blower for providing airflow, finished product packaging machine and electric control system for equipment operation management.
How to optimize wollastonite grinding efficiency?
First, control the feeding particle size within the specified range to avoid excessive feeding pressure. Second, adjust the speed of the powder classifier reasonably to reduce the circulation load of over-grinding. Third, replace worn grinding rollers and grinding rings regularly to maintain sufficient grinding force. Fourth, ensure stable air volume to improve powder separation efficiency. Reasonable regular maintenance can also keep the equipment in good working condition and improve overall efficiency.
Roller Mills for Sale
About LKMixer
LKMixer is a professional manufacturer for grinding and mixing production line, grinder, mixer and granulator, shredder. These machines are widely used in food, pharmaceutical, cosmetic, health care products and chemical industries. The Food materials like Peanut, mushroom, seeds, potato, bean, tobacco, salt, cannabis, tea, Sugar, corn, Coffee, rice, pepper, grain as so on. Grinders have many types such as Pulse Dust Grinder which suitable for zero pollution environment, Turbine Mill which is suitable for coffee bean, 12-120mesh all can meet, Ultrafine Grinding Mill covers 80-200mesh, and also Winnowing Dust Grinder or other grinding machines like SF Hammer. Welcome to contact us for details. Contact us for more information. Proposal, catalog, quotation.
FAQ(Click and See More)
Why Choose Us?
We have 20 years manufacturing experiences; 15600 cubic meters factory area; 5000sets annual capacity; 55 professional engineers;
What’s your main maket?
South America: Brazil, Colombia, Peru, Bolivia, Uruguay, Paraguay ;Romania;
USA with UL Certification
Middle East: Saudi, Arabia, Oman, Turkey
Europe: Russia, Australia, Belarus, Ukraine, Poland
Can you support OEM?
– Yes, OEM or ODM. Machine can be customized according to customer detail requirement, including capacity and voltages, motor certifications.
– Drawing and raw materials also can be customized.
What after-sale services?
– 7*24 customer service online;
– 7*24 engineers online services;
– 12 months warranty services.
WHAT kind of MACHINE YOUR COMPANY HAVE?
CAN YOU GIVE ME GUIDE ON OTHER MACHINE ? TO FULL MY PRODUCTION LINE
YES ! Our f have factory build more than 20 years now, we can design and customize whole line, besides of the grinding machine, mixing machine, we can also fully support to provide the washing machine, cutting machine, drying machine, packing machine, filling machine. Though we are not producing these machine, but our brother companies co-work together for over 20 years, we have rich experience in providing you a full effective production line, fully automatically or semi-automatically.
HOW TO VISIT YOUR COMPANY?
Our Factory located in Jiangsu Province, very near to Shanghai, you can fly to Shanghai Pudong Airport, we pick you up and take you by car 2 hours ride, can reach our factory, welcome your visit.
WHAT’S YOUR BEFORE & AFTER SERVICE ?
1) Before your purchasing, we need to know your detail request, such as what kind of material you want to grind and mixing, what final product powder or granule you want to reach. Because different material and powder sizes request of different machine to do. We can provide professional advice and rich experience help to choose machine. Most of the products we have already did before for other customer, trail test or run mass production, so we knows which machine is best in performance of grinding and mixing. This is of very importance in helping you choose the right model. We also wish this can help our customer a lot. Even the material we didn’t do before, we will prepare the same material and to do the trail test and send video to you for your reference.
2) One Year guarantee of machine quality. If the machine have problem within one year, we will send you the spare parts to you for replacement, but this not including the damage caused by human causes. We also have 24 hours on line guide for customer, if you have operation difficulty, we will guide by video and on line communication with our engineer for your emergency debug.
3) For small machine, we sell with whole machine, it’s no need to install, and easy to operation, no problems for operation. While for large machine, its’s also not difficult to install with video guideline, but if you need, we can assign our technicians to go abroad, the round ticket, food and residents will be paid by customer.
HOW ABOUT YOUR PAYMENT TERM?
Our payment term is T/T. 50% payment in advance, rest of 50% payment finish before the goods shipped. When we finish the machine production we will do trail test and run the machine take videos for your green light. You pay the rest of 50% payment then.
