Aluminium hydroxide grinding mill
China No.1 Technology
- Our New type: Combined grinding wheel bracket – Demonstration of assembly
- Our New – type: Rhombic Spindle
- Easy to disassemble.
- Low cost of accessories.
- Spindle nut No loosening, No thread slipping, No falling off.
- Low cost, High reliability
Aluminium hydroxide grinding mill description:
Actually, this is a purpose-built industrial grinding rig made specifically for working with aluminium hydroxide materials. It can turn raw aluminium hydroxide into custom fineness powder products, with steady grinding performance, adjustable particle size, and solid efficiency to fit all kinds of industrial processing needs.
| Mesh (D97) | 319 Type | |
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 325 | 10000~12000 | 22-26 |
| 400 | 9000~9500 | 26-30 |
| 600 | 6000~7500 | 31-36 |
| 800 | 5000~6500 | 46-53 |
| 1250 | / | / |
| 377-407 kW | ||
| Mesh (D97) | 219 Type 28 rollers or 26 Roller Price are the same | 309 Type 32 Roller or 28 Roller price are the same | 1160 Type 32rollers or 34rollers price are the same | |||
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 400 | 5000~6000 | 29-38 | 9000~9500 | 26-30 | ||
| 800 | 4000~4500 | 45-53 | 5500~6500 | 43-48 | 6500~7500 | 41-48 |
| 1250 | 2300~3000 | 65-70 | 3500~4000 | 66-72 | 4500~5200 | 59-75 |
| 1500 | 1600~2300 | 83-90 | 2500~3000 | 85-92 | 3200~4000 | 78-90 |
| 2000 | 1100~1600 | 125-133 | 1500~2000 | 125-133 | 2300~2800 | 110-134 |
| 2500 | 900~1300 | 138-145 | 1100~1500 | 138-146 | 1500~1800 | 160-201 |
| 3000 | / | / | 1000~1200 | 185-192 | / | / |
| Total Power | 237 kW | 340-387 kW | 372-457 kW | |||
- Drawing line: As shown in below picture：
- Dig a hole: The SHM-309 foundation drawing showed size : length:3.65M,wide:3M，highly:0.5M.When Dig the hole need to have reservation some size.
Suggest size: length:4M，wide:3.5M.
- Put reinforced:Arrangement of two layers of rebar in the pit.
The size of reinforced:DiameterΦ16，spacing:20cm，Tie the rebar tightly with steel wire.
- Set mould: Enclose the square pit with template and height is the same as the ground.
- Welded: Accurately arrange the position of the steel mould and motor seat.Put 6 rebar (Φ 24) inside of each steel die (2 steel mould); Four corners of the motor base stand up and 1 rebar(Φ 18). Each rebar is 50 cm higher than the horizontal plane.
- First pouring concrete: The height is the same as the floor.
- Placing main machine steel die: The next day, Placing the main machine steel mould according to the size of the basic drawing.
- Weld: After the steel mould is put in place and make sure all sizes are correct. Weld the steel mould with 6 rebars (Φ24) together.
- The second pouring concrete. When pouring, the first steel mould is pouring half, and then poured another half of the steel mould, then back to pouring the first steel mould. It ensures that the size comparison does not deviate.Attention
- A single steel mould must be horizontal, at the same time, two steel mould dies must be horizontal.
- The pitch-row of the foundation bolts of two steel mould must be accurate. SHM-309 roller mill is 2045mm.
- Two steel mould cannot be misplaced.（It can be corrected by diagonal lines between steel dies, the length of diagonal must be equal.）
- The center line between steel mould and motor seat must be accurate. SHM-309 roller mill is 1900mm.
- After the steel mould is put in place and make sure all sizes are correct, the two steel mould must be welded and fixed with three channels steel before pouring concrete. Make sure the steel mould is not displacement and dimension not error during pouring. (This step must be done.)
What is aluminium hydroxide grinding mill?
Simply put, this is a professional powder processing tool made specifically to shrink the particle size of aluminium hydroxide. It’s a type of industrial grinding equipment that turns large lumps or granular aluminium hydroxide into evenly ground fine powder, and it’s widely used in non-metallic mineral processing and chemical material manufacturing industries.
What is the aluminium hydroxide grinding mill process?
Here’s the standard workflow: First, you’ll pre-crush the raw aluminium hydroxide into small particles first, then feed it into the mill. As it gets ground by the grinding rollers and grinding ring, a dynamic classifier will sift out any fine powder that meets the required fineness, while any too-large particles get sent back to the grinding chamber to be re-ground. Finally, the finished powder gets collected by the dedicated powder collection system.
What are the uses of aluminium hydroxide grinding mill?
This equipment’s main job is turning aluminium hydroxide into fine powder for downstream industrial use. The finished powder is most commonly used as a flame retardant for plastics and rubber, a filler for paper products, a raw material for aluminum-based chemical products, and an additive for building materials. It hits the exact fineness standards needed for aluminium hydroxide across all different industrial applications.
What is the best aluminium hydroxide grinding mill process?
The top-tier process is closed-circuit grinding paired with a dynamic classifier. This setup lets you accurately control the finished powder’s fineness, cut down on over-grinding, lower energy use, and boost overall production efficiency. It also makes sure the finished aluminium hydroxide powder has a consistent, even particle size distribution, which meets the quality standards for most downstream uses.
aluminium hydroxide grinding mill process Application:
This grinding process works across the inorganic chemical, building materials, new material, and environmental protection industries. It’s used to make flame-retardant grade aluminium hydroxide powder for polymer materials, papermaking and artificial marble fillers, plus raw materials for activated alumina and other aluminum-based chemical products.
aluminium hydroxide grinding mill Processing Technology:
There are two main processing techniques: dry grinding and wet grinding. Dry grinding is the most popular option: you pre-crush the raw aluminium hydroxide, feed it into the mill, grind it, sort it using the built-in classifier, then collect the finished powder with a pulse dust collector. Wet grinding is only used when you need extremely fine fineness, and it requires a follow-up drying step afterward.
Guide to aluminium hydroxide grinding mill: Mills, Tips, and Uses
Common mill types include Raymond mills, vertical roller mills, and ball mills. A few quick pro tips: pick your equipment model based on your required fineness and production output, keep an eye on feed particle size to avoid overloading the machine, and do regular maintenance to keep performance steady. At its core, this equipment’s main use is turning aluminium hydroxide into high-quality fine powder for flame retardants, chemical raw materials, and industrial fillers.
What is the auxiliary equipment in a aluminium hydroxide grinding mill plant?
The standard lineup of auxiliary equipment includes a jaw crusher for pre-crushing raw materials, an elevator for moving materials between stages, a vibrating feeder to keep feeding consistent, a powder classifier to sort finished powder, a pulse dust collector to catch stray dust, a fan for air circulation, and a packaging machine to bag up the final aluminium hydroxide powder.
How to optimize aluminium hydroxide grinding efficiency?
There are four key ways to boost efficiency: first, keep feed particle size within a reasonable range to avoid overloading the mill with too many large chunks. Second, adjust the classifier’s speed properly to hit your target fineness and cut down on unnecessary over-grinding. Third, do regular maintenance on the grinding rollers and rings to keep strong, consistent grinding contact. Fourth, tweak the ventilation volume to improve powder separation efficiency and lower overall energy use.
Roller Mills for Sale
About LKMixer
LKMixer is a professional manufacturer for grinding and mixing production line, grinder, mixer and granulator, shredder. These machines are widely used in food, pharmaceutical, cosmetic, health care products and chemical industries. The Food materials like Peanut, mushroom, seeds, potato, bean, tobacco, salt, cannabis, tea, Sugar, corn, Coffee, rice, pepper, grain as so on. Grinders have many types such as Pulse Dust Grinder which suitable for zero pollution environment, Turbine Mill which is suitable for coffee bean, 12-120mesh all can meet, Ultrafine Grinding Mill covers 80-200mesh, and also Winnowing Dust Grinder or other grinding machines like SF Hammer. Welcome to contact us for details. Contact us for more information. Proposal, catalog, quotation.
FAQ(Click and See More)
Why Choose Us?
We have 20 years manufacturing experiences; 15600 cubic meters factory area; 5000sets annual capacity; 55 professional engineers;
What’s your main maket?
South America: Brazil, Colombia, Peru, Bolivia, Uruguay, Paraguay ;Romania;
USA with UL Certification
Middle East: Saudi, Arabia, Oman, Turkey
Europe: Russia, Australia, Belarus, Ukraine, Poland
Can you support OEM?
– Yes, OEM or ODM. Machine can be customized according to customer detail requirement, including capacity and voltages, motor certifications.
– Drawing and raw materials also can be customized.
What after-sale services?
– 7*24 customer service online;
– 7*24 engineers online services;
– 12 months warranty services.
WHAT kind of MACHINE YOUR COMPANY HAVE?
CAN YOU GIVE ME GUIDE ON OTHER MACHINE ? TO FULL MY PRODUCTION LINE
YES ! Our f have factory build more than 20 years now, we can design and customize whole line, besides of the grinding machine, mixing machine, we can also fully support to provide the washing machine, cutting machine, drying machine, packing machine, filling machine. Though we are not producing these machine, but our brother companies co-work together for over 20 years, we have rich experience in providing you a full effective production line, fully automatically or semi-automatically.
HOW TO VISIT YOUR COMPANY?
Our Factory located in Jiangsu Province, very near to Shanghai, you can fly to Shanghai Pudong Airport, we pick you up and take you by car 2 hours ride, can reach our factory, welcome your visit.
WHAT’S YOUR BEFORE & AFTER SERVICE ?
1) Before your purchasing, we need to know your detail request, such as what kind of material you want to grind and mixing, what final product powder or granule you want to reach. Because different material and powder sizes request of different machine to do. We can provide professional advice and rich experience help to choose machine. Most of the products we have already did before for other customer, trail test or run mass production, so we knows which machine is best in performance of grinding and mixing. This is of very importance in helping you choose the right model. We also wish this can help our customer a lot. Even the material we didn’t do before, we will prepare the same material and to do the trail test and send video to you for your reference.
2) One Year guarantee of machine quality. If the machine have problem within one year, we will send you the spare parts to you for replacement, but this not including the damage caused by human causes. We also have 24 hours on line guide for customer, if you have operation difficulty, we will guide by video and on line communication with our engineer for your emergency debug.
3) For small machine, we sell with whole machine, it’s no need to install, and easy to operation, no problems for operation. While for large machine, its’s also not difficult to install with video guideline, but if you need, we can assign our technicians to go abroad, the round ticket, food and residents will be paid by customer.
HOW ABOUT YOUR PAYMENT TERM?
Our payment term is T/T. 50% payment in advance, rest of 50% payment finish before the goods shipped. When we finish the machine production we will do trail test and run the machine take videos for your green light. You pay the rest of 50% payment then.
