Petroleum coke grinding mill
China No.1 Technology
- Our New type: Combined grinding wheel bracket – Demonstration of assembly
- Our New – type: Rhombic Spindle
- Easy to disassemble.
- Low cost of accessories.
- Spindle nut No loosening, No thread slipping, No falling off.
- Low cost, High reliability
Petroleum coke grinding mill description:
This is a specialized industrial grinding setup built specifically for processing petroleum coke—those carbonaceous byproducts that come from oil refining. It lets you flexibly adjust the final grind fineness, runs super reliably, and crushes material quickly. It works for small, medium, and large-scale petroleum coke processing projects, so it can hit all the different particle size standards needed for whatever downstream use case you’re targeting.
| Mesh (D97) | 319 Type | |
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 325 | 10000~12000 | 22-26 |
| 400 | 9000~9500 | 26-30 |
| 600 | 6000~7500 | 31-36 |
| 800 | 5000~6500 | 46-53 |
| 1250 | / | / |
| 377-407 kW | ||
| Mesh (D97) | 219 Type 28 rollers or 26 Roller Price are the same | 309 Type 32 Roller or 28 Roller price are the same | 1160 Type 32rollers or 34rollers price are the same | |||
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 400 | 5000~6000 | 29-38 | 9000~9500 | 26-30 | ||
| 800 | 4000~4500 | 45-53 | 5500~6500 | 43-48 | 6500~7500 | 41-48 |
| 1250 | 2300~3000 | 65-70 | 3500~4000 | 66-72 | 4500~5200 | 59-75 |
| 1500 | 1600~2300 | 83-90 | 2500~3000 | 85-92 | 3200~4000 | 78-90 |
| 2000 | 1100~1600 | 125-133 | 1500~2000 | 125-133 | 2300~2800 | 110-134 |
| 2500 | 900~1300 | 138-145 | 1100~1500 | 138-146 | 1500~1800 | 160-201 |
| 3000 | / | / | 1000~1200 | 185-192 | / | / |
| Total Power | 237 kW | 340-387 kW | 372-457 kW | |||
- Drawing line: As shown in below picture：
- Dig a hole: The SHM-309 foundation drawing showed size : length:3.65M,wide:3M，highly:0.5M.When Dig the hole need to have reservation some size.
Suggest size: length:4M，wide:3.5M.
- Put reinforced:Arrangement of two layers of rebar in the pit.
The size of reinforced:DiameterΦ16，spacing:20cm，Tie the rebar tightly with steel wire.
- Set mould: Enclose the square pit with template and height is the same as the ground.
- Welded: Accurately arrange the position of the steel mould and motor seat.Put 6 rebar (Φ 24) inside of each steel die (2 steel mould); Four corners of the motor base stand up and 1 rebar(Φ 18). Each rebar is 50 cm higher than the horizontal plane.
- First pouring concrete: The height is the same as the floor.
- Placing main machine steel die: The next day, Placing the main machine steel mould according to the size of the basic drawing.
- Weld: After the steel mould is put in place and make sure all sizes are correct. Weld the steel mould with 6 rebars (Φ24) together.
- The second pouring concrete. When pouring, the first steel mould is pouring half, and then poured another half of the steel mould, then back to pouring the first steel mould. It ensures that the size comparison does not deviate.Attention
- A single steel mould must be horizontal, at the same time, two steel mould dies must be horizontal.
- The pitch-row of the foundation bolts of two steel mould must be accurate. SHM-309 roller mill is 2045mm.
- Two steel mould cannot be misplaced.（It can be corrected by diagonal lines between steel dies, the length of diagonal must be equal.）
- The center line between steel mould and motor seat must be accurate. SHM-309 roller mill is 1900mm.
- After the steel mould is put in place and make sure all sizes are correct, the two steel mould must be welded and fixed with three channels steel before pouring concrete. Make sure the steel mould is not displacement and dimension not error during pouring. (This step must be done.)
What is Petroleum coke grinding mill?
At its core, this is a professional milling machine made specifically to turn block petroleum coke into fine powder with the exact particle size you need. Unlike generic grinding mills, it’s been optimized to handle petroleum coke’s high hardness and carbon-heavy makeup, so it has great wear resistance and consistent performance. It can take big chunks of petroleum coke and turn them into usable industrial-grade powder smoothly.
What is the Petroleum coke grinding mill process?
Let’s walk through it simply: first, bulk petroleum coke gets pre-crushed down to a manageable size. Then a feeder sends that crushed material into the grinding mill, where grinding rollers and rings work together to crush and fine-tune the material. Once ground, the powder moves through a classifier to sort out particles: the ones that meet the size requirement get collected by a powder collector, while the too-large coarse stuff gets sent back to the grinding chamber to be run through again.
What are the uses of Petroleum coke grinding mill?
Its main job is turning petroleum coke into powder for other industries. You can make fuel-grade powder to use in cement plants, power plants, and glass factories. It also lets you produce super fine petroleum coke powder for things like making carbon products, aluminum smelting anodes, graphite electrodes, and carbon materials for the chemical industry.
What is the best Petroleum coke grinding mill process?
The top-tier process is closed-circuit grinding paired with airflow classification. This setup sends any unqualified coarse powder back to the grinding chamber to be reprocessed, which cuts down on over-grinding, saves energy, boosts efficiency, and makes sure the final product’s fineness stays consistent and even. It also pairs with dust collection gear to meet environmental standards, and it works perfectly for large-scale, continuous production runs.
Petroleum coke grinding mill process Application:
This processing setup works across petroleum coke deep processing industries. You can use it to make fuel-grade powder for kiln combustion in building materials and energy sectors, produce fine carbon-grade powder for smelting and carbon product manufacturing, and even handle modified petroleum coke processing for things like lithium battery anode materials and other new energy material applications.
Petroleum coke grinding mill Processing Technology:
There are four core steps here: pre-crushing, feeding, grinding and classification, and finished product collection. It uses a mix of mechanical grinding and airflow classification, so you can adjust the final fineness anywhere from 80 mesh all the way up to 2000 mesh. The key grinding parts are made with wear-resistant materials to extend their lifespan, and it runs under negative pressure to meet safety and environmental rules for handling flammable petroleum coke.
Guide to Petroleum coke grinding mill: Mills, Tips, and Uses
Common types include Raymond mills, vertical roller mills, and ultrafine grinding mills. Raymond mills are great for medium-fineness production and have a low upfront cost, while vertical roller mills are built for large-scale, high-efficiency runs. A few quick pro tips: keep an eye on feed size and moisture, regularly check and adjust grinding roller pressure, and make sure you have solid explosion-proof protection in place. Overall, it’s used to make both fuel powder and carbon raw material powder for a wide range of industries.
What is the auxiliary equipment in a Petroleum coke grinding mill plant?
You’ll need a few key extra pieces: a jaw crusher to pre-crush those big bulk petroleum coke chunks, an electromagnetic vibrating feeder to keep feeding material evenly, a pulse dust collector to handle dust and stay eco-friendly, a classifier to tweak the final product’s fineness, a powder storage silo, a packaging machine for finished goods, plus conveying equipment and explosion-proof ventilation systems to keep operations safe and up to code.
How to optimize Petroleum coke grinding efficiency?
Start by nailing your feed size and moisture: keep the feed within the mill’s recommended size limits, and make sure petroleum coke moisture is under 5% to stop material from sticking together. Then adjust the grinding pressure and classifier rotation speed to match your desired fineness. Don’t skip regular maintenance on the core grinding parts, either—swap out severely worn pieces right away. Finally, stick to a closed-circuit process to cut down on over-grinding, which will really help boost your overall grinding efficiency over time.
Roller Mills for Sale
About LKMixer
LKMixer is a professional manufacturer for grinding and mixing production line, grinder, mixer and granulator, shredder. These machines are widely used in food, pharmaceutical, cosmetic, health care products and chemical industries. The Food materials like Peanut, mushroom, seeds, potato, bean, tobacco, salt, cannabis, tea, Sugar, corn, Coffee, rice, pepper, grain as so on. Grinders have many types such as Pulse Dust Grinder which suitable for zero pollution environment, Turbine Mill which is suitable for coffee bean, 12-120mesh all can meet, Ultrafine Grinding Mill covers 80-200mesh, and also Winnowing Dust Grinder or other grinding machines like SF Hammer. Welcome to contact us for details. Contact us for more information. Proposal, catalog, quotation.
FAQ(Click and See More)
Why Choose Us?
We have 20 years manufacturing experiences; 15600 cubic meters factory area; 5000sets annual capacity; 55 professional engineers;
What’s your main maket?
South America: Brazil, Colombia, Peru, Bolivia, Uruguay, Paraguay ;Romania;
USA with UL Certification
Middle East: Saudi, Arabia, Oman, Turkey
Europe: Russia, Australia, Belarus, Ukraine, Poland
Can you support OEM?
– Yes, OEM or ODM. Machine can be customized according to customer detail requirement, including capacity and voltages, motor certifications.
– Drawing and raw materials also can be customized.
What after-sale services?
– 7*24 customer service online;
– 7*24 engineers online services;
– 12 months warranty services.
WHAT kind of MACHINE YOUR COMPANY HAVE?
CAN YOU GIVE ME GUIDE ON OTHER MACHINE ? TO FULL MY PRODUCTION LINE
YES ! Our f have factory build more than 20 years now, we can design and customize whole line, besides of the grinding machine, mixing machine, we can also fully support to provide the washing machine, cutting machine, drying machine, packing machine, filling machine. Though we are not producing these machine, but our brother companies co-work together for over 20 years, we have rich experience in providing you a full effective production line, fully automatically or semi-automatically.
HOW TO VISIT YOUR COMPANY?
Our Factory located in Jiangsu Province, very near to Shanghai, you can fly to Shanghai Pudong Airport, we pick you up and take you by car 2 hours ride, can reach our factory, welcome your visit.
WHAT’S YOUR BEFORE & AFTER SERVICE ?
1) Before your purchasing, we need to know your detail request, such as what kind of material you want to grind and mixing, what final product powder or granule you want to reach. Because different material and powder sizes request of different machine to do. We can provide professional advice and rich experience help to choose machine. Most of the products we have already did before for other customer, trail test or run mass production, so we knows which machine is best in performance of grinding and mixing. This is of very importance in helping you choose the right model. We also wish this can help our customer a lot. Even the material we didn’t do before, we will prepare the same material and to do the trail test and send video to you for your reference.
2) One Year guarantee of machine quality. If the machine have problem within one year, we will send you the spare parts to you for replacement, but this not including the damage caused by human causes. We also have 24 hours on line guide for customer, if you have operation difficulty, we will guide by video and on line communication with our engineer for your emergency debug.
3) For small machine, we sell with whole machine, it’s no need to install, and easy to operation, no problems for operation. While for large machine, its’s also not difficult to install with video guideline, but if you need, we can assign our technicians to go abroad, the round ticket, food and residents will be paid by customer.
HOW ABOUT YOUR PAYMENT TERM?
Our payment term is T/T. 50% payment in advance, rest of 50% payment finish before the goods shipped. When we finish the machine production we will do trail test and run the machine take videos for your green light. You pay the rest of 50% payment then.
