Talc grinding mill
China No.1 Technology
- Our New type: Combined grinding wheel bracket – Demonstration of assembly
- Our New – type: Rhombic Spindle
- Easy to disassemble.
- Low cost of accessories.
- Spindle nut No loosening, No thread slipping, No falling off.
- Low cost, High reliability
Talc grinding mill description:
Actually, a talc grinding mill is a specialized industrial milling tool built specifically for processing talc ore. It can turn raw talc into fine or ultra-fine powder that fits different application needs, with perks like stable running, adjustable powder fineness, and high grinding efficiency. It’s also specially optimized for talc’s soft, low-hardness properties to stop over-crushing and keep impurities from contaminating the final product.
| Mesh (D97) | 319 Type | |
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 325 | 10000~12000 | 22-26 |
| 400 | 9000~9500 | 26-30 |
| 600 | 6000~7500 | 31-36 |
| 800 | 5000~6500 | 46-53 |
| 1250 | / | / |
| 377-407 kW | ||
| Mesh (D97) | 219 Type 28 rollers or 26 Roller Price are the same | 309 Type 32 Roller or 28 Roller price are the same | 1160 Type 32rollers or 34rollers price are the same | |||
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 400 | 5000~6000 | 29-38 | 9000~9500 | 26-30 | ||
| 800 | 4000~4500 | 45-53 | 5500~6500 | 43-48 | 6500~7500 | 41-48 |
| 1250 | 2300~3000 | 65-70 | 3500~4000 | 66-72 | 4500~5200 | 59-75 |
| 1500 | 1600~2300 | 83-90 | 2500~3000 | 85-92 | 3200~4000 | 78-90 |
| 2000 | 1100~1600 | 125-133 | 1500~2000 | 125-133 | 2300~2800 | 110-134 |
| 2500 | 900~1300 | 138-145 | 1100~1500 | 138-146 | 1500~1800 | 160-201 |
| 3000 | / | / | 1000~1200 | 185-192 | / | / |
| Total Power | 237 kW | 340-387 kW | 372-457 kW | |||
- Drawing line: As shown in below picture：
- Dig a hole: The SHM-309 foundation drawing showed size : length:3.65M,wide:3M，highly:0.5M.When Dig the hole need to have reservation some size.
Suggest size: length:4M，wide:3.5M.
- Put reinforced:Arrangement of two layers of rebar in the pit.
The size of reinforced:DiameterΦ16，spacing:20cm，Tie the rebar tightly with steel wire.
- Set mould: Enclose the square pit with template and height is the same as the ground.
- Welded: Accurately arrange the position of the steel mould and motor seat.Put 6 rebar (Φ 24) inside of each steel die (2 steel mould); Four corners of the motor base stand up and 1 rebar(Φ 18). Each rebar is 50 cm higher than the horizontal plane.
- First pouring concrete: The height is the same as the floor.
- Placing main machine steel die: The next day, Placing the main machine steel mould according to the size of the basic drawing.
- Weld: After the steel mould is put in place and make sure all sizes are correct. Weld the steel mould with 6 rebars (Φ24) together.
- The second pouring concrete. When pouring, the first steel mould is pouring half, and then poured another half of the steel mould, then back to pouring the first steel mould. It ensures that the size comparison does not deviate.Attention
- A single steel mould must be horizontal, at the same time, two steel mould dies must be horizontal.
- The pitch-row of the foundation bolts of two steel mould must be accurate. SHM-309 roller mill is 2045mm.
- Two steel mould cannot be misplaced.（It can be corrected by diagonal lines between steel dies, the length of diagonal must be equal.）
- The center line between steel mould and motor seat must be accurate. SHM-309 roller mill is 1900mm.
- After the steel mould is put in place and make sure all sizes are correct, the two steel mould must be welded and fixed with three channels steel before pouring concrete. Make sure the steel mould is not displacement and dimension not error during pouring. (This step must be done.)
What is Talc grinding mill?
Simply put, this is professional powder processing equipment made just for talc. It takes block or granular raw talc and turns it into usable powder using mechanical extrusion, impact, and grinding. You can tweak the final powder’s fineness to match different industrial needs, and it’s a staple in talc processing lines for both mining and chemical sectors.
What is the Talc grinding mill process?
Let’s walk through the standard workflow step by step. First, bulk talc ore gets crushed into small particles with a primary crusher. Next, those crushed particles are lifted to a storage silo, then fed evenly into the talc grinding mill using a feeder. After grinding, the powder classifier sorts out qualified fine powder, which a dust collector gathers and stores as the finished product. Any coarse, unqualified powder gets sent back to the mill cavity to be ground again.
What are the uses of Talc grinding mill?
This equipment turns raw talc into powder products for a huge range of industries. The finished talc powder works as a filling for paper, an ingredient in cosmetics, a reinforcement material for plastics, a component in ceramic production, a thickener for paint, an additive for medicine and food, and a material for rubber manufacturing. It supplies high-quality talc powder that meets the fineness and purity standards of all kinds of downstream industries.
What is the best Talc grinding mill process?
The ideal process really depends on your actual production needs. For standard industrial talc powder with a fineness between 200 and 2000 mesh, a vertical roller grinding mill process is your best bet—it’s energy-efficient, has a high output, and keeps fineness consistent. If you need ultra-fine powder finer than 2500 mesh, an air classification ultra-fine grinding process is a better fit, since it can hit those strict fineness marks while keeping impurity levels low.
Talc grinding mill process Application:
The talc grinding mill’s processing workflow works across tons of industrial fields. It turns talc ore into raw powder for papermaking, coatings, plastics, rubber, ceramics, cosmetics, pharmaceuticals, and more. It can scale easily too, whether you’re running a small local processing plant or a large-scale ore processing base, and it can meet varying fineness and output demands from different downstream industries.
Talc grinding mill Processing Technology:
The core processing steps include pre-crushing, quantitative feeding, mechanical grinding, powder classification, finished product collection, and purification. Common technical setups include using a jaw crusher plus a Raymond mill for most jobs, a pendulum mill for medium-fineness products, and a vertical roller mill paired with air classification for high-volume ultra-fine products. Most full setups also include closed-circuit dust collection to keep the final product pure and meet environmental rules.
Guide to Talc grinding mill: Mills, Tips, and Uses:
There are several common types of talc grinding mills, like Raymond mills, pendulum roller mills, vertical roller mills, and ultra-fine ring roller mills. When picking one, match the model to your required output and fineness goals. A few quick pro tips: keep feed particle size within the machine’s design limits, regularly check wear on grinding rollers and liners, and adjust the classifier speed to fine-tune fineness. At the end of the day, its main job is processing talc powder for downstream industrial production.
What is the auxiliary equipment in a Talc grinding mill plant?
A full talc grinding mill setup needs a range of auxiliary gear. That includes a primary crusher like a jaw crusher, an elevator to move materials around, a vibrating feeder for even feeding, a powder classifier to sort finished powder, a pulse dust collector to control dust, a storage silo for finished powder, a packaging machine for final products, and a fan system to handle air circulation throughout the milling process.
How to optimize Talc grinding mill grinding efficiency?
There are a few simple ways to boost grinding efficiency. First, stick to the machine’s recommended feed particle size range to avoid overloading the mill. Second, tweak the grinding pressure to match your target fineness to cut down on wasted energy. Third, swap out severely worn grinding rollers and liners regularly to keep the grinding force consistent. Finally, make sure the air volume and classifier speed are properly matched to cut down on circulating unqualified powder and boost overall output.
Roller Mills for Sale
About LKMixer
LKMixer is a professional manufacturer for grinding and mixing production line, grinder, mixer and granulator, shredder. These machines are widely used in food, pharmaceutical, cosmetic, health care products and chemical industries. The Food materials like Peanut, mushroom, seeds, potato, bean, tobacco, salt, cannabis, tea, Sugar, corn, Coffee, rice, pepper, grain as so on. Grinders have many types such as Pulse Dust Grinder which suitable for zero pollution environment, Turbine Mill which is suitable for coffee bean, 12-120mesh all can meet, Ultrafine Grinding Mill covers 80-200mesh, and also Winnowing Dust Grinder or other grinding machines like SF Hammer. Welcome to contact us for details. Contact us for more information. Proposal, catalog, quotation.
FAQ(Click and See More)
Why Choose Us?
We have 20 years manufacturing experiences; 15600 cubic meters factory area; 5000sets annual capacity; 55 professional engineers;
What’s your main maket?
South America: Brazil, Colombia, Peru, Bolivia, Uruguay, Paraguay ;Romania;
USA with UL Certification
Middle East: Saudi, Arabia, Oman, Turkey
Europe: Russia, Australia, Belarus, Ukraine, Poland
Can you support OEM?
– Yes, OEM or ODM. Machine can be customized according to customer detail requirement, including capacity and voltages, motor certifications.
– Drawing and raw materials also can be customized.
What after-sale services?
– 7*24 customer service online;
– 7*24 engineers online services;
– 12 months warranty services.
WHAT kind of MACHINE YOUR COMPANY HAVE?
CAN YOU GIVE ME GUIDE ON OTHER MACHINE ? TO FULL MY PRODUCTION LINE
YES ! Our f have factory build more than 20 years now, we can design and customize whole line, besides of the grinding machine, mixing machine, we can also fully support to provide the washing machine, cutting machine, drying machine, packing machine, filling machine. Though we are not producing these machine, but our brother companies co-work together for over 20 years, we have rich experience in providing you a full effective production line, fully automatically or semi-automatically.
HOW TO VISIT YOUR COMPANY?
Our Factory located in Jiangsu Province, very near to Shanghai, you can fly to Shanghai Pudong Airport, we pick you up and take you by car 2 hours ride, can reach our factory, welcome your visit.
WHAT’S YOUR BEFORE & AFTER SERVICE ?
1) Before your purchasing, we need to know your detail request, such as what kind of material you want to grind and mixing, what final product powder or granule you want to reach. Because different material and powder sizes request of different machine to do. We can provide professional advice and rich experience help to choose machine. Most of the products we have already did before for other customer, trail test or run mass production, so we knows which machine is best in performance of grinding and mixing. This is of very importance in helping you choose the right model. We also wish this can help our customer a lot. Even the material we didn’t do before, we will prepare the same material and to do the trail test and send video to you for your reference.
2) One Year guarantee of machine quality. If the machine have problem within one year, we will send you the spare parts to you for replacement, but this not including the damage caused by human causes. We also have 24 hours on line guide for customer, if you have operation difficulty, we will guide by video and on line communication with our engineer for your emergency debug.
3) For small machine, we sell with whole machine, it’s no need to install, and easy to operation, no problems for operation. While for large machine, its’s also not difficult to install with video guideline, but if you need, we can assign our technicians to go abroad, the round ticket, food and residents will be paid by customer.
HOW ABOUT YOUR PAYMENT TERM?
Our payment term is T/T. 50% payment in advance, rest of 50% payment finish before the goods shipped. When we finish the machine production we will do trail test and run the machine take videos for your green light. You pay the rest of 50% payment then.
