Continuous talc grinding mill
China No.1 Technology
- Our New type: Combined grinding wheel bracket – Demonstration of assembly
- Our New – type: Rhombic Spindle
- Easy to disassemble.
- Low cost of accessories.
- Spindle nut No loosening, No thread slipping, No falling off.
- Low cost, High reliability
Continuous talc grinding mill description
Actually, Continuous talc grinding mill is a large-capacity industrial grinding piece of equipment built just for continuous processing of talc raw materials. It supports uninterrupted feeding and discharging, consistently turning out ground talc powder with adjustable fineness, and works perfectly for large-scale talc production. It’s more efficient than traditional batch grinding mills, so it can easily meet the demand for steady talc powder supply across all kinds of downstream industries.
| Mesh (D97) | 319 Type | |
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 325 | 10000~12000 | 22-26 |
| 400 | 9000~9500 | 26-30 |
| 600 | 6000~7500 | 31-36 |
| 800 | 5000~6500 | 46-53 |
| 1250 | / | / |
| 377-407 kW | ||
| Mesh (D97) | 219 Type 28 rollers or 26 Roller Price are the same | 309 Type 32 Roller or 28 Roller price are the same | 1160 Type 32rollers or 34rollers price are the same | |||
| Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | Output (kg/h) | Cunsumption of Electricity (kWh/t) | |
| 400 | 5000~6000 | 29-38 | 9000~9500 | 26-30 | ||
| 800 | 4000~4500 | 45-53 | 5500~6500 | 43-48 | 6500~7500 | 41-48 |
| 1250 | 2300~3000 | 65-70 | 3500~4000 | 66-72 | 4500~5200 | 59-75 |
| 1500 | 1600~2300 | 83-90 | 2500~3000 | 85-92 | 3200~4000 | 78-90 |
| 2000 | 1100~1600 | 125-133 | 1500~2000 | 125-133 | 2300~2800 | 110-134 |
| 2500 | 900~1300 | 138-145 | 1100~1500 | 138-146 | 1500~1800 | 160-201 |
| 3000 | / | / | 1000~1200 | 185-192 | / | / |
| Total Power | 237 kW | 340-387 kW | 372-457 kW | |||
- Drawing line: As shown in below picture：
- Dig a hole: The SHM-309 foundation drawing showed size : length:3.65M,wide:3M，highly:0.5M.When Dig the hole need to have reservation some size.
Suggest size: length:4M，wide:3.5M.
- Put reinforced:Arrangement of two layers of rebar in the pit.
The size of reinforced:DiameterΦ16，spacing:20cm，Tie the rebar tightly with steel wire.
- Set mould: Enclose the square pit with template and height is the same as the ground.
- Welded: Accurately arrange the position of the steel mould and motor seat.Put 6 rebar (Φ 24) inside of each steel die (2 steel mould); Four corners of the motor base stand up and 1 rebar(Φ 18). Each rebar is 50 cm higher than the horizontal plane.
- First pouring concrete: The height is the same as the floor.
- Placing main machine steel die: The next day, Placing the main machine steel mould according to the size of the basic drawing.
- Weld: After the steel mould is put in place and make sure all sizes are correct. Weld the steel mould with 6 rebars (Φ24) together.
- The second pouring concrete. When pouring, the first steel mould is pouring half, and then poured another half of the steel mould, then back to pouring the first steel mould. It ensures that the size comparison does not deviate.Attention
- A single steel mould must be horizontal, at the same time, two steel mould dies must be horizontal.
- The pitch-row of the foundation bolts of two steel mould must be accurate. SHM-309 roller mill is 2045mm.
- Two steel mould cannot be misplaced.（It can be corrected by diagonal lines between steel dies, the length of diagonal must be equal.）
- The center line between steel mould and motor seat must be accurate. SHM-309 roller mill is 1900mm.
- After the steel mould is put in place and make sure all sizes are correct, the two steel mould must be welded and fixed with three channels steel before pouring concrete. Make sure the steel mould is not displacement and dimension not error during pouring. (This step must be done.)
What is Continuous talc grinding mill?
Continuous talc grinding mill is a specialized industrial grinding machine purpose-built for processing talc ore nonstop. Unlike batch-type grinding mills, it can run without interruption for long stretches—continuously accepting raw talc and spitting out qualified finished talc powder. That makes it ideal for industrial processing plants that need high-volume, mass production of talc powder.
What is the Continuous talc grinding mill process?
To start, pre-crushed and dried talc raw material gets fed steadily into the mill’s grinding chamber. The grinding parts use friction and extrusion to shrink the talc particle size. Then, airflow carries the ground powder over to the classification unit: fine powder that meets the size requirement gets collected as finished product, while any oversized particles get sent right back to the grinding chamber for another pass. The whole cycle keeps going nonstop, no shutdown needed.
What are the uses of Continuous talc grinding mill?
Simply put, the main job of Continuous talc grinding mill is to turn raw talc ore into talc powder in different fineness grades. The powder it produces goes into a huge range of industries, including papermaking, plastics, coatings, cosmetics, ceramics, pharmaceuticals, and rubber. Its ability to run nonstop makes it especially perfect for large production projects that need consistent, long-term talc powder output.
What is the best Continuous talc grinding mill process?
The optimal setup changes a little based on your specific output and fineness needs, but for most use cases, the closed-circuit airflow continuous grinding process is widely considered the best option. This method pairs continuous grinding with real-time airflow classification, which cuts down on over-grinding, lowers energy use, keeps finished product fineness consistent, and maintains the steady nonstop output that matches what Continuous talc grinding mills are designed for.
Continuous talc grinding mill process Application:
The continuous grinding process for Continuous talc grinding mill is mostly used in large-scale talc beneficiation and processing plants for mass production of talc powder. It can process raw talc into finished products anywhere from 200-mesh all the way up to 3000-mesh. These powders get supplied to downstream industries as papermaking filler, plastic modifiers, coating thickeners, cosmetic raw materials, and ceramic additives, easily meeting the large market demand for talc powder.
Continuous talc grinding mill Processing Technology:
The core processing technology relies on continuous feeding paired with closed-circuit grinding and airflow classification. Pre-crushed and pre-dried talc raw material gets fed steadily into the grinding chamber. The grinding unit—usually a vertical roller, ball, or Raymond type—processes the material, then airflow carries fine powder to the classifier. Powder that meets size requirements is collected by dust collection equipment, while oversized particles go back to the grinding chamber for another round. You can adjust fineness easily by changing the classifier speed and airflow parameters.
Guide to Continuous talc grinding mill: Mills, Tips, and Uses
When it comes to mill types, the most common options for Continuous talc grinding mill are vertical roller mill, ball mill, and Raymond mill—you can pick the right one based on your production output and fineness needs. For helpful tips, we recommend keeping raw material moisture below 2% to avoid annoying material clumping; check and replace worn grinding parts regularly to keep efficiency high, and adjust classifier parameters promptly to maintain consistent finished product fineness. As for uses, it’s made for mass-producing talc powder for all kinds of industrial sectors.
What is the auxiliary equipment in a Continuous talc grinding mill plant?
There are several common auxiliary tools you’ll need. First, a feeder—usually a vibrating feeder—to keep feeding steady and continuous. Then pre-crushing equipment, like a jaw crusher, to shrink large talc ore down to the right input size. You’ll also need drying equipment (a dryer) to lower raw material moisture, an airflow classifier to sort out qualified powder, a baghouse dust collector to control dust pollution, conveying equipment like belt conveyors and pneumatic conveyors to move material around, and packaging equipment for your finished powder.
How to optimize Continuous talc grinding mill grinding efficiency?
Start by controlling the feed size and moisture of your raw talc: keep the pre-crushed size within the equipment’s recommended range, and keep moisture low to avoid clumping and wasted energy. Next, adjust grinding pressure and classifier speed reasonably to match your required fineness, which cuts down on unnecessary over-grinding. It’s also a good idea to regularly check and replace worn grinding parts to keep grinding force consistent. Finally, keep the airflow system clear to make sure powder separation and transportation go smoothly.
Roller Mills for Sale
About LKMixer
LKMixer is a professional manufacturer for grinding and mixing production line, grinder, mixer and granulator, shredder. These machines are widely used in food, pharmaceutical, cosmetic, health care products and chemical industries. The Food materials like bean, Medicine, seeds, potato, bean, tobacco, salt, cannabis, tea, salt, corn, Coffee, rice, pepper, grain as so on. Grinders have many types such as metal pulverizer machinewhich suitable for its using environment, Electric Grinder which is suitable for electric using environment, Industrial cannabis grinder , and also extra large grinder or other grinding machines like SF Hammer. Welcome to contact us for details. Contact us for more information. Proposal, catalog, quotation.
FAQ(Click and See More)
Why Choose Us?
We have 20 years manufacturing experiences; 15600 cubic meters factory area; 5000sets annual capacity; 55 professional engineers;
What’s your main maket?
South America: Brazil, Colombia, Peru, Bolivia, Uruguay, Paraguay ;Romania;
USA with UL Certification
Middle East: Saudi, Arabia, Oman, Turkey
Europe: Russia, Australia, Belarus, Ukraine, Poland
Can you support OEM?
– Yes, OEM or ODM. Machine can be customized according to customer detail requirement, including capacity and voltages, motor certifications.
– Drawing and raw materials also can be customized.
What after-sale services?
– 7*24 customer service online;
– 7*24 engineers online services;
– 12 months warranty services.
WHAT kind of MACHINE YOUR COMPANY HAVE?
CAN YOU GIVE ME GUIDE ON OTHER MACHINE ? TO FULL MY PRODUCTION LINE
YES ! Our f have factory build more than 20 years now, we can design and customize whole line, besides of the grinding machine, mixing machine, we can also fully support to provide the washing machine, cutting machine, drying machine, packing machine, filling machine. Though we are not producing these machine, but our brother companies co-work together for over 20 years, we have rich experience in providing you a full effective production line, fully automatically or semi-automatically.
HOW TO VISIT YOUR COMPANY?
Our Factory located in Jiangsu Province, very near to Shanghai, you can fly to Shanghai Pudong Airport, we pick you up and take you by car 2 hours ride, can reach our factory, welcome your visit.
WHAT’S YOUR BEFORE & AFTER SERVICE ?
1) Before your purchasing, we need to know your detail request, such as what kind of material you want to grind and mixing, what final product powder or granule you want to reach. Because different material and powder sizes request of different machine to do. We can provide professional advice and rich experience help to choose machine. Most of the products we have already did before for other customer, trail test or run mass production, so we knows which machine is best in performance of grinding and mixing. This is of very importance in helping you choose the right model. We also wish this can help our customer a lot. Even the material we didn’t do before, we will prepare the same material and to do the trail test and send video to you for your reference.
2) One Year guarantee of machine quality. If the machine have problem within one year, we will send you the spare parts to you for replacement, but this not including the damage caused by human causes. We also have 24 hours on line guide for customer, if you have operation difficulty, we will guide by video and on line communication with our engineer for your emergency debug.
3) For small machine, we sell with whole machine, it’s no need to install, and easy to operation, no problems for operation. While for large machine, its’s also not difficult to install with video guideline, but if you need, we can assign our technicians to go abroad, the round ticket, food and residents will be paid by customer.
HOW ABOUT YOUR PAYMENT TERM?
Our payment term is T/T. 50% payment in advance, rest of 50% payment finish before the goods shipped. When we finish the machine production we will do trail test and run the machine take videos for your green light. You pay the rest of 50% payment then.
